heat treatment的例句大全

A heat treatment to composite membrane, preferred in a 70 ℃ hot air bath for 20 minutes can improve the salt resistance of the composite membrane. ⅱ.

对复合膜进行适当的热处理可以进一步改善复合膜的脱盐性能，以70℃热空气浴，20min为宜。

Heat Treatment Defects of The Beryllium Bronze and Its Double Age-Strengthening

铍青铜的热处理缺陷分析和双重时效强化

Effect of heat treatment on bonding of TAI/ LY12 rolled bimetal plate is studied.

研究了热处理制度对TAl/LY12轧制双金属板结合性能的影响。

Heat treatment process has great influence on the microstructure and binding strength of the interfaces.

热处理方式对粘结层的显微结构、粘结强度有明显影响。

The Heat Treatment of Boron Steel

硼钢的热处理

Study of Heat Treatment Technics on Carbide Joint by High Frequency Induction Brazing

高频感应钎焊硬质合金接头热处理工艺研究

Effects of Heat Treatment on Properties of Brazing Seam

热处理对硬钎焊焊缝性能的影响

Application of frequency change speed governor in AC motor used for heat treatment in boiler making industry

交流变频调速器在锅炉制造行业热处理炉风机上的应用

Statistics include heat-sensitive version, free version, UV sensitive treatment of development and violet laser exposure.

统计范围包括热敏版 、 免显影版 、 紫外线感光版及蓝紫色激光曝光版.

The studying result points out that through mechanical alloying method, with a certain composition of Fe C Ti alloy, the iron base super saturated dissolved solid can be obtained. Through the vacuum heat treatment, the spreaded strengthened iron base alloy is then prepared.

结果指出，一定成分的Fe－C－Ti合金可以通过机械合金化法得到铁基过饱和固溶体，将其进行真空热处理，可制得TiC弥散强化的铁基合金；

Particular attention was paid to CaO-MgO-Al_2O_3 carrier. The effect of composition of the carrier, temperature and time of calcining and heat treatment of catalyst on the interaction between carrier and nickel were studied.

并着重研究了CaO-MgO-Al2O3型催化剂载体和镍作用的强弱与载体组成、煅烧温度、时间和值化剂热处理条件的关系。

Digestible protein content of three oil free seed samples increased substantially with increased temperature of moist heat treatment up to ( 108 ± 1)℃.

当温度上升到（108±1）℃时，3个脱脂样品的可消化蛋白质含量显著增加。

The experimental results show that by combining rare earth modification with heat treatment the eutectic carbide network changes into carbide piece and precipitation of granular carbide are accelerated as a result deferring crack forming time and reduce crack propagation speed and increase the impact fatigue resistance effectively.

结果表明：稀土与热处理复合作用，可加速网状共晶碳化物向孤立块状的转变，促进粒状碳化物的析出，有效地推迟裂纹产生的时间，降低裂纹扩展速率，提高其冲击疲劳抗力。

The application of the box type gas carburizing heat treatment line with controllable atmosphere

控制气氛箱式气体渗碳热处理生产线的应用

The article describes the composition and application of a box type gas carburizing heat treatment line with controllable atmosphere.

本文介绍了控制气氛箱式气体渗碳热处理生产线的组成及其应用情况。

Two surface heat-treatment processes, liquid nitriding and sulfurizing, are used to compare with the current production process of liquid carburizing, with other variables remaining constant.

两种表面热处理液体渗氮及渗硫工艺与现行生产上原采用之液体渗炭淬火处理工艺，在尽量保持其他可变数不变的情状下加以比较。

The catenary suspension furnace for quenching and tempering of the crankshafts has been successfully developed, and thus main heat treatment equipment has been renewed.

研制了用于曲轴调质的悬链炉，从而更新了主要的热处理设备。

Acid treatment of support on the performance of catalysts combined with heat storage function

载体酸处理对蓄热-催化双功能催化剂性能的影响

Tooth Contact Changes of Gleason Spiral Bevel Gear Due to Heat Treatment

格利森螺旋伞齿轮热处理后接触区的变化规律

Microporous ceramic filter and its application to the boiler slag washing wastewater treatment in heat power plant

微孔陶瓷过滤装置及其在火电厂冲渣水治理工程上的应用